Practical coverage
The 3/4-inch width covers common plumbing threads efficiently and helps maintain an even wrap.
19 mm × 15 m × 0.20 mm White PTFE Thread Seal Tape for Water Pipes
- Model
- TF19-40/0.3
Item specifics
- Brand
- ForeverSeal
- Business Type
- PTFE Tape Manufacturer
- Specification
- 19 mm × 0.20 mm × 15 m
- Model
- TF19-40/0.3
- Apparent Density
- 0.25–0.35 g/cm³
- Color
- White
- Composition
- 100% PTFE
- Declared Material Temperature Range
- −190°C to +260°C (−310°F to +500°F)
- Tensile Strength
- 8 MPa
- Elongation
- 25% minimum
- Declared Chemical Range
- pH 0–14
- Certifications
- ISO 9001, DVGW, CE, UL, RoHS, WRAS, ACS — application scope must be confirmed
Review
Description
19 mm × 15 m × 0.20 mm · Model TF19-40/0.3 This 19 mm white PTFE thread seal tape is made for sealing compatible male tapered pipe threads in plumbing and water-line assemblies. Its 0.20 mm film gives installers a substantial layer for controlled wrapping, while the 15 m roll supports routine installation and maintenance work. The specified thickness places more material in each layer than thinner general-purpose films. A convenient roll length for distributors, plumbing kits, maintenance teams and private-label programs. PTFE plumbing tape fills the small clearances between mating tapered threads and reduces friction during assembly. It does not seal by adhesive. Correct joint geometry, clean threads, proper wrapping direction and controlled tightening are all part of a reliable connection. Use only where the fitting manufacturer and local code permit PTFE thread sealing tape. Do not use it on flare, cone, compression or gasket-sealed connections. Engineering note: temperature and chemical values describe the declared tape material capability. The allowable conditions of an assembled connection may be lower and depend on the fitting, pipe material, pressure, fluid, thread condition and applicable approval. Request application-specific documentation before specifying the tape for regulated or safety-critical service. Confirm that the connection uses compatible male tapered threads. Replace damaged or mismatched fittings. Remove old tape, sealant, oil and debris from both mating threads before assembly. Apply the tape in the tightening direction, beginning behind the first thread so material cannot enter the line. Keep even tension, follow the specified wrap count and tighten to the fitting manufacturer's instructions. ForeverSeal controls mixing, calendering, stretching, slitting, rewinding and packing in its PTFE tape production workflow. Dimensional checks support repeatable width, thickness, length and density across wholesale orders. For more information about inspection procedures, visit our PTFE tape quality control process. Buyers developing a retail or distributor range can also review our private-label and OEM/ODM PTFE tape service. It is designed for compatible male tapered pipe threads in water-line, valve, shower, hose and general plumbing applications where PTFE tape is permitted. No. PTFE thread sealing tape is non-adhesive. It conforms to the threads, fills clearances and lubricates assembly as the tapered joint is tightened. Potable-water suitability depends on the exact certification required by the destination market and project. Ask ForeverSeal for the current certificate and covered conditions before specification. Do not select gas tape by polymer or color alone. Gas service requires a product explicitly approved for the gas type, pressure, temperature and local code. Ask us for a suitable gas-rated grade. Yes. OEM and private-label options can include spool, cover, label and packing configurations, subject to order requirements and manufacturing review. Specify before you buy Send your destination market, application, required approvals, packing format and order quantity. ForeverSeal will confirm the suitable construction and provide the relevant technical documentation for review.
White PTFE Thread Seal Tape for Water Pipe Fittings
Request a quote for 19 mm PTFE thread seal tape
Why Choose This 19 mm PTFE Plumber's Tape?
Substantial film
Work-ready roll
Designed for Threaded Water Connections
Typical applications
Technical Specifications
Product type White PTFE thread seal tape / plumber's tape Model TF19-40/0.3 Nominal size 19 mm × 15 m × 0.20 mm Apparent density 0.25–0.35 g/cm³ Composition 100% PTFE Color White Tensile strength 8 MPa Elongation 25% minimum Declared material temperature range −190°C to +260°C (−310°F to +500°F) Declared chemical range pH 0–14
How to Apply PTFE Thread Seal Tape
Inspect
Clean
Wrap
Assemble
Consistent Manufacturing for Wholesale Supply
Frequently Asked Questions
What is this 19 mm PTFE thread seal tape used for?
Is this tape adhesive?
Can it be used for potable water?
Can this white PTFE tape be used on gas lines?
Can the spool and packaging be customized?
Contact a PTFE tape specialist
Request a Quote for 19 mm × 15 m PTFE Thread Seal Tape
